Ultimate LCD Gaming Table

I had originally planned on building the table based on the design of my friend, Tom Arnott, but luckily I was able to obtain an already built table so that saved A LOT of time and money. So with the table in the basement, I layed the LCD screen I had purchased (Visio 37" 1080P) on a large piece of cardboard and then traced around the edge to make a template I could then transfer to the table to get the size of the hole correct. After cutting it to size, I centered it on the table and taped the corners down. Then I took some blue painters tape and made a frame around it on the table, then removed the cardboard and was left with a perfect sized hole template on the table.

I then used a 1" hole saw to cut out a hole in each corner so that I would have some room to use a jigsaw to make the cuts in the side.