Success!!!!

Posted by ZombiesRComng

With everything connected, I fired up the TV and computer and let it all boot up. Once it was up and running, I linked the Wiimote to the computer with the Bluetooth adapter and then calibrated it with the Smoothboard program and the IR Pen I made. Once that was all set up and working I turned on my laptop which would be used by the GM to control the map. When that had booted up, I started MapTools, opened a map I had created, and then started the server. From the Gaming Table system, I opened MapTools and then connected to the server and went into Full Screen mode. I set the zoom level to 19% from the laptop which put the squares on the screen at right about 1".


One thing that we noticed after the LCD had been on for about 10 or 15 minutes is that some condensation formed on the Plexiglas above lower part of the screen (you can see it in the first picture). Not sure what is causing that other than maybe the Plexi was cold and the heat from the screen was causing it. Maybe drilling some vent holes in that section of the plexi would help, but then stuff could fall into the holes. I'll have to investigate this further. Perhaps using actual glass might be a better option?

0 comments:

Post a Comment